Central Connectors
Central Butt Connector B 180° +/-45°
0,00 €*
A (mm):
31.0
|
B (mm):
10.0
|
D (mm):
7.1
|
L (mm):
75.0
|
Profile:
B
|
Ranura N (mm):
8
|
SW (mm):
4
|
b (mm):
18.0
|
d (mm):
Ø11
|
t (mm):
22.0
Países de Entrega:En todo el mundoDescription:End-to-end connection of two aluminum profilesof the same type; a blind or through hole must be drilledbefore the assembly; bendable from 90° to 180°Material:Tie-rod: Stainless steel Bushes: SteelSurface:Tie-rod: Plain Bushes: Zinc platedTip:Cover Cap* (1) = profile 40; (2) profile 45; (3) profile 50
Central Butt Connector I 180° +/-45°
0,00 €*
A (mm):
31.0
|
D (mm):
6.5
|
L (mm):
75.0
|
Profile:
I
|
Ranura N (mm):
8
|
SW (mm):
4
|
d (mm):
11.0
|
t (mm):
20.0
Países de Entrega:En todo el mundoDescription:End-to-end connection of two aluminum profiles of the same type; a blind or through hole must be drilled before the assembly; bendable from 90° to 180°Material:Tie-rod: Stainless steel Bushes: SteelSurface:Tie-rod: Plain Bushes: Zinc plated
Central Connector B 90° +/-45°
0,00 €*
D (mm):
7.1
|
L (mm):
51.0
|
Profile:
B
|
Ranura N (mm):
8
|
SW (mm):
4
|
b (mm):
18.0
|
d (mm):
Ø11
|
t (mm):
22.0
Países de Entrega:En todo el mundoDescription:End-to-end connection of two aluminum profiles of the same type; a blind or through hole must be drilled before the assembly; bendable from 45° to 135°Material:Tie-rod: Stainless steel Bushes: SteelSurface:Tie-rod: Plain Bushes: Zinc platedTip:Cover Cap* (1) = profile 40; (2) profile 45; (3) profile 50
Central Connector B Universal, Slot 10
0,00 €*
A (mm):
19.6
|
B (mm):
5.5
|
D (mm):
9.8
|
L (mm):
46.0
|
Profile:
B
|
Ranura N (mm):
10
|
SW (mm):
6
|
d (mm):
16.85
Países de Entrega:En todo el mundoDescription:To connect two aluminum profiles at right angles; a blind or through hole must be drilled through one of the profiles to provide access to the tightening screwMaterial:AceroSuperficie:Galvanizado
Central Connector B, Bush 9.8 / Slot 10
0,00 €*
A (mm):
19.4
|
B (mm):
5.3
|
D (mm):
6.8
|
L (mm):
45.6
|
Profile:
B
|
Ranura N (mm):
10
|
SW (mm):
3
|
Version:
90°
|
b (mm):
22.5
|
d (mm):
Ø9.8
Países de Entrega:En todo el mundoDescription:To connect two aluminum profiles at right angles; a through hole must be drilled into one of the profiles to provide access to the tightening screw, the slot walls are nor taffected by this; the bush flush fits with the slot base, thus leaving both slots free to use; the slot can be completely covered with a cover profileMaterial:AceroSuperficie:Galvanizado
Central Connector B, Slot 6
0,00 €*
A (mm):
11.0
|
B (mm):
3.6
|
D (mm):
5.2
|
L (mm):
20.1
|
Profile:
B
|
Ranura N (mm):
6
|
SW (mm):
2.5
|
b (mm):
10.0
|
d (mm):
7.9
|
t (mm):
18.5
|
Ángulo de apertura:
0° / 90°
Países de Entrega:En todo el mundoDescription:To connect two aluminum profiles at right angles; a hole must be drilled through one of the profiles to provide access to the tightening screwMaterial:Acero inoxidableSuperficie:Liso
Central Connector B, Slot 8 and Slot 10
0,00 €*
A (mm):
19.6
|
B (mm):
5.5
|
D (mm):
9.8
|
L (mm):
45.5
|
Profile:
B
|
Ranura N (mm):
10
|
SW (mm):
6
|
Version:
0°
|
b (mm):
22.5
|
d (mm):
Ø17
|
t (mm):
31.0 *(1) 34.0 *(2) 36.0 *(3) 41.0 *(4)
Países de Entrega:En todo el mundoDescription:To connect two aluminum profiles at right angles; a blind or through hole must be drilled through one of the profiles to provide access to the tightening screwMaterial:Galvanizado / lisoSuperficie:GalvanizadoTip:* (1) = profile 40; (2) = profile 45; (3) = profile 50
Central Connector Bush 15, Slot 8
0,00 €*
Version:
(B) Hammer vertically / horizontally to bush
Países de Entrega:En todo el mundoDescription:To connect two aluminum profiles at right angles; a hole must be drilled through one of the profiles to provide access to the tightening screwMaterial:AceroSuperficie:Galvanizado
Central Connector I 90° +/-45°
0,00 €*
A (mm):
13.0
|
B (mm):
6.0
|
D (mm):
6.5
|
L (mm):
51.0
|
Profile:
I
|
Ranura N (mm):
8
|
SW (mm):
4
|
b (mm):
18.5
|
d (mm):
11.0
|
t (mm):
20.0
Países de Entrega:En todo el mundoDescription:End-to-end connection of two aluminum profiles of the same type; a blind or through hole must be drilled before the assembly; bendable from 45° to 135°Material:Tie-rod: Stainless steel Bushes: SteelSurface:Tie-rod: Plain Bushes: Zinc plated
Central Connector I, Slot 8
0,00 €*
ESD:
-
|
Profile:
I
|
Ranura N (mm):
8
|
Version:
without notches
Color:Cover cap: gray ≈ RAL 7042Países de Entrega:En todo el mundoDescription:To connect two aluminum profiles at right angles; before the application a 28 mm deep blind hole with Ø 14.2 mm lateral and a 20 mm deep blind hole with Ø 8.2 mm frontal must be drilled; with cover capMaterial:Connector: Steel Clamp: Stainless steel Cover caps: Plastic PPSurface:Connector: Zinc plated Clip: PlainTip:Compatible Radius Seal see 093RD84040R4; if used with the radius seal, the distance dimension of the bore hole should be reduced by the thickness of the radius seal