Productos

Componentes de Ingenierِía

Fractional Components

Herrajes Industriales

New Products

Quicklinks

Solar Components

Taller e Intralogistica

Floor Window DIN A5 - 5.8" x 8.3"

Color: Azul ≈ RAL 5017 Fig.: ③

Color:Amarillo, rojo, azul, verde, blancoPaíses de Entrega:En todo el mundoDescription:For easy and reliable marking of parking / storage areas etc., self-adhesive; Forklift-resistant and stable floor window with outstanding adhesive strength, suitable for almost all industrial floors Scanner-compatibleFastening:Self-adhesive strip on the backsideMaterial:Plástico PVC

0,00 €

Flush Folding Pocket Pull Handle ZN 130 x 31

Color:NegroPaíses de Entrega:North America, Central America, Caribbean, South America, China, United Kingdom, Ireland, Netherlands, Estonia, Latvia, Lithuania,Poland, Czechia, Slovakia, Hungary, Slovenia, Croatia, Serbia, Romania, BulgariaDescription:Concealed handle to mount on doors and flapsMaterial:Zinc fundido a presiónSuperficie:Polvo cubierto

0,00 €

Flush Pocket Pull Handle PA 110 x 57

0,00 €

Flush Pocket Pull Handle PA 113 x 67

Ts (mm): 1.2 - 1.6

0,00 €

Flush Pocket Pull Handle PA 123 x 46.7

Ts (mm): 1.0 - 1.8

0,00 €

Flush Pocket Pull Handle PA 136.3 x 35.5

Ts (mm): 1.0 - 1.4

0,00 €

Flush Pocket Pull Handle PA 91.8 x 35.5

Ts (mm): 1.4 - 1.8

0,00 €

Flush Pocket Pull Handle PA 94 x 41

0,00 €

Flush Pocket Pull Handle SS 110 x 64

Países de Entrega:North America, Central America, Caribbean, South America, China, United Kingdom, Ireland, Netherlands, Estonia, Latvia, Lithuania,Poland, Czechia, Slovakia, Hungary, Slovenia, Croatia, Serbia, Romania, BulgariaDescription:Concealed handle to mount on doors and flapsMaterial:Acero inoxidable SS304

0,00 €

Folding Door Element (Set)

Profile: B ØD (mm): 4.9

Color:Guide bushes: BlackPaíses de Entrega:En todo el mundoDescription:To assemble folding doors, simultaeous turning and sliding movement; guide bush can be inserted in different positions for slot 8 and 10; high quality designMaterial:Folding door element: Aluminum Screws: Steel Hammer nuts: Steel Pin: Steel Guide bushes: POMSet:1 folding door element, 2 screws DIN EN ISO 10642 (DIN 7991) - M5 x 10, 2 hammer nuts - slot 8 - M5, 1 pin DIN EN ISO 2338 (DIN 7) - D5 x 14, 1 guide bush - slot 8, 1 guide bush - slot 10Especiales:Otras superficies bajo pedidoSurface:Folding door element: Anodized Screws: Zinc plated Hammer nuts: Zinc plated Pin: Zinc plated

0,00 €

Folding Handle SS

H (mm): 41.5 L (mm): 150.0

Países de Entrega:North America, Central America, Caribbean, South America, China, United Kingdom, Ireland, Netherlands, Estonia, Latvia, Lithuania,Poland, Czechia, Slovakia, Hungary, Slovenia, Croatia, Serbia, Romania, BulgariaDescription:To mount on doors and flapsMaterial:Acero inoxidable SS304

0,00 €

Folding Handle ST

H (mm): 41.5 L (mm): 135.0

Color:CromoPaíses de Entrega:North America, Central America, Caribbean, South America, China, United Kingdom, Ireland, Netherlands, Estonia, Latvia, Lithuania,Poland, Czechia, Slovakia, Hungary, Slovenia, Croatia, Serbia, Romania, BulgariaDescription:To mount on doors and flapsMaterial:AceroSuperficie:Cromado chapado

0,00 €

Frame Corner Connector 18 x 32 for Clamp Profile (Set)

Profile: I

Color:Frame Corner Connector: Alu colorPaíses de Entrega:En todo el mundoDescription:To connect two clamp profiles 18 x 32 at right anglesMaterial:Frame corner connector: Aluminum die-cast Screws: SteelSet:1 Frame Corner Connector, 2 screws DIN EN ISO 7380 (DIN 34805) - M5 x 16Surface:Frame corner connector: Powder coated Screws: Zinc platedTip:Compatible Sliding Door Guide Insert for Frame Corner Connector 18 x 32 (Set) see 093WWCI18321S01

0,00 €

Frame Corner Connector 20 x 40 (Set)

Profile: I Ranura N (mm): 8

Color:Frame corner connector: Alu color Screws: Steel Cover cap: Gray ≈ RAL 7042Países de Entrega:En todo el mundoDescription:To connect two aluminum frame profiles 20 x 40 at right anglesMaterial:Frame corner connector: Aluminum die-cast Screws: Steel Cover cap: Plastic PA, glass fiber reinforcedSet:1 frame corner connector 20 x 40 - slot 8, 4 self-tapping screws - M4 x 20, 1 cover capSurface:Frame corner connector: Powder coated Screws: Zinc plated

0,00 €

Frame Corner Connector 22.5 x 45 (Set)

Profile: B Ranura N (mm): 10

Países de Entrega:En todo el mundoDescription:To connect two aluminum frame profiles 22.5 x 45 at right anglesMaterial:Frame corner connector: Aluminum die-cast Screws: Stainless steel SS 304Set:1 frame corner connector 22.5 x 45 - slot 10, 4 screws DIN EN ISO 7050 (DIN 7982) - 4.8 x 30 - hexalobular socket T25Especiales:Otras superficies, otros colores bajo pedidoSurface:Frame corner connector: Plain Screws: Zinc plated

0,00 €

Frame Corner Connector Plate

Profile: B Ranura N (mm): 8 Version: incl. conjunto de montaje

Assembly Set:1 self forming countersunk screw S8 x 25, 1 countersunk screw DIN EN ISO 10642 (DIN 7991) - M8 x 16, 1 square nut DIN 562 - M8Color:Corner connector plate: BlackPaíses de Entrega:En todo el mundoDescription:To connect two frame profiles 22.5 x 30 at right angles; ESD electrostatical dischargingMaterial:Corner connector plate: Plastic PA, carbon fiber reinforced Assembly set: SteelSuperficie:Conjunto de montaje: GalvanizadoTip:*Compatible Self Forming Countersunk Screw S8 x 25 see 093S0825C

0,00 €

Friction Joint B40L for System Arm (Set)

B (mm): 40 MAmax (Nm): 45.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 6.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 2 cover caps 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 2 washers 8-FSt 2 centering plates 2 T-slot nuts - slot 10 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801

0,00 €

Friction Joint B45L for System Arm (Set)

B (mm): 45 MAmax (Nm): 45.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 12.0

0,00 €

Friction Joint B80H for System Arm (Set)

B (mm): 40 L x B (mm): 80 x 40 MAmax (Nm): 200.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 2x 3.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 4 cover caps 4 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 4 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 4 washers 8-FSt 4 centering plates 4 T-slot nuts - slot 10 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801

0,00 €

Friction Joint B80L for System Arm (Set)

B (mm): 40 L x B (mm): 80 x 40 MAmax (Nm): 70.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 15.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 3 cover caps 3 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 3 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 3 washers 8-FSt 3 centering plates 3 T-slot nuts - slot 10- M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801

0,00 €

Friction Joint B90H for System Arm (Set)

B (mm): 45 L x B (mm): 90 x 45 MAmax (Nm): 200.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 2x 3.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 4 cover caps 4 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 4 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 4 washers 8-FSt 4 centering plates 4 T-slot nuts - slot 10 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801

0,00 €

Friction Joint B90L for System Arm (Set)

B (mm): 45 L x B (mm): 90 x 45 MAmax (Nm): 70.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 3.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 3 cover caps 3 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 3 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 3 washers 8-FSt 3 centering plates 3 T-slot nuts - slot 10- M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801

0,00 €

Friction Joint I40L for System Arm (Set)

B (mm): 40 MAmax (Nm): 45.0 Profile: I R (mm): 4.0 Ranura N (mm): 8 W (Nm): 3.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 2 cover caps 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 2 washers 8-FSt 2 centering plates 2 T-slot nuts - slot 8 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc plated

0,00 €

Friction Joint I80H for System Arm (Set)

B (mm): 40 L x B (mm): 80 x 40 MAmax (Nm): 200.0 Profile: I R (mm): 4.0 Ranura N (mm): 8 W (Nm): 2x 15.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 4 cover caps 4 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 4 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 4 washers 8-FSt 4 centering plates 4 T-slot nuts - slot 8 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc plated

0,00 €