Industrial Work Stations
Adapter Pallet for Dollies
0,00 €*
Version:
For Dollies without lateral guide
Países de Entrega:En todo el mundoDescription:For efficient transport of dollies 600 x 400 (4 pieces on one level), 800 x 600 (2 pieces on one level), or 1200 x 800 (1 piece on one level); Dollies can be loaded or stacked with other dollies as empties; The adapter pallet is roller conveyor, forklift and AGV compatible (AGV = automated guided vehicles) and locks the dollies automatically by lifting them from the forklift or AGVMaterial:AceroSuperficie:Galvanizado / liso
Adapter Plate 40 Height Adjustable
0,00 €*
Profile:
I
|
Ranura N (mm):
8
Color:Color aluminioPaíses de Entrega:En todo el mundoDescription:To connect a monitor mount or an aluminum profile at right angles, as well to tee connect two aluminum profiles; accessible mounting holes allow to adjust the position laterMaterial:Adapter plate: Die cast aluminum Pressed nut: SteelSurface:Adapter plate: Powder coated Pressed nut: Zinc platedTip:Compatible Monitor Mount see 061SM7510040
Adhesive Clip Slot 10 - 6.0
0,00 €*
L (mm):
50.0
|
Profile:
B
|
Ranura N (mm):
10
Color:NegroPaíses de Entrega:En todo el mundoDescription:For attaching magnetic signs, labels, office supplies etc. in slot 10Material:Plástico PPEspeciales:Otros colores bajo pedido
Adhesive Clip Slot 8 - 4.5
0,00 €*
L (mm):
25.0
|
Profile:
I
|
Ranura N (mm):
8
Color:NegroPaíses de Entrega:En todo el mundoDescription:For attaching magnetic signs, labels, office supplies etc. in slot 8 Material:Plástico PPEspeciales:Otros colores bajo pedido
Adjustable Caster End Stop for Guiding Rail FIFO (Set)
0,00 €*
L (mm):
178.0
|
Profile:
I
Color:Cover caps: Gray ≈ RAL 7042Países de Entrega:En todo el mundoDescription:To stop dollies in guiding rails FIFO; Easy installation with enclosed connectorsMaterial:Profile: Aluminum Cover Cap: Plastic PA Connector: SteelSet:1 profile piece 2 cover caps 2 connectorsSurface:Profile: Anodized Connector: Zinc platedTip:Compatible Guiding Rail FIFO see 02082P.1200
Adjustable Friction Joint B40L for System Arm (Set)
0,00 €*
B (mm):
40.0
|
MAmax (Nm):
45.0
|
Profile:
B
|
R (mm):
3.0
|
Ranura N (mm):
10
Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°, friction is continuously adjustable via clamping screw (or optional locking lever); End side can be attached lateral or transverse on the profile slot, friction axis is positioned at right angles to the profile; Friction joint side can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 2 cover caps 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 35 (for clamping 2 washers 8-FSt 2 centering plates 2 T-slot nuts - slot 10 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801Tip 2:Compatible Locking Lever for Adjustable Friction Joint see 041LL065K91M840M1-
Adjustable Friction Joint I40L for System Arm (Set)
0,00 €*
B (mm):
40.0
|
MAmax (Nm):
45.0
|
Profile:
I
|
R (mm):
4.0
|
Ranura N (mm):
8
Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°, friction is continuously adjustable via clamping screw (or optional locking lever); End side can be attached lateral or transverse on the profile slot, friction axis is positioned at right angles to the profile; Friction joint side can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 2 cover caps 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 35 (for clamping 2 washers 8-FSt 2 centering plates 2 T-slot nuts - slot 10 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Compatible Locking Lever for Adjustable Friction Joint see 041LL065K91M840M1-
Alu Connection Angle 30
0,00 €*
Color:
-
|
Profile:
-
|
Ranura N (mm):
6
|
Superficie:
Liso
|
Version:
-
Assembly Set 1:2 hammer nuts - slot 8 - M6, 2 screws DIN 7984 - M6 x 14 Assembly Set 2:1 hammer nut - slot 8 - M6, 1 screw DIN 7984 - M6 x 14, 1 hammer nut - slot 10 - M6, 1 screw DIN 7984 - M6 x 18Assembly Set 3:2 hammer nuts - slot 10 - M6, 2 screws DIN 7984 - M6 x 18Color:Angle: Alu colorPaíses de Entrega:En todo el mundoDescription:To connect two aluminum profiles or panels at right angles; the connection angle can be closed with the cover capMaterial:Angle: Aluminum die-cast Assembly set: SteelEspeciales:Otras superficies, otros colores bajo pedidoSurface:Angle: Plain / Powder coated Assembly set: Zinc platedTip:Compatible Centering Piece Widening Slot 8 to Slot 10 see 093W02 Compatible Cover Cap see 093WA303S02
Alu Connection Angle 30 x 60
0,00 €*
Color:
-
|
Profile:
-
|
Ranura N (mm):
8
|
Superficie:
Liso
|
Version:
-
Assembly Set:4 hammer nuts - slot 8 - M6, 4 screws DIN 7984 - M6 x 14Color:Angle: Alu colorPaíses de Entrega:En todo el mundoDescription:To connect two aluminum profiles or panels at right angles; the connection angle can be closed with the cover capMaterial:Angle: Aluminum die-cast Assembly set: SteelEspeciales:Otras superficies, otros colores bajo pedidoSurface:Angle: Plain / Powder coated Assembly set: Zinc platedTip:Compatible Centering Piece Widening Slot 8 to Slot 10 see 093W02 Compatible Cover Cap see 093WA302
Alu Connection Angle I40 M (Set)
0,00 €*
Profile:
I
|
Ranura N (mm):
8
Color:Color aluminioPaíses de Entrega:En todo el mundoDescription:To connect two aluminum profiles quickly at right angles, direct inserting into the profile slot thanks to correct positioning of the pre-assembled magnet rhombus screws and countersunk nuts; the connection angle can be closed with the cover capMaterial:Angle: Aluminum die-cast Magnet rhombus screws: Steel Countersunk nuts: SteelEspeciales:Otras superficies, otros colores bajo pedidoSurface:Angle: Powder coated Magnet rhombus screws: Zinc plated Countersunk nuts: Zinc platedTip:Compatible Cover Cap see 093WA406
Alu Connection Angle I40 M Length/Cross (Set)
0,00 €*
Profile:
I
|
Ranura N (mm):
8
Color:Angle: Alu color Cover cap: Gray≈ RAL 7042 Ring: BlackPaíses de Entrega:En todo el mundoDescription:To connect two aluminum profiles quickly at right angles lengthwise or crosswise, direct inserting into the profile slot thanks to correct positioning of the pre-assembled magnet rhombus screws and countersunk nuts; the connection angle can be closed with the cover capMaterial:Angle: Aluminum die-cast Cover cap: Plastic PA, glass fiber reinforced, Magnet rhombus screws: Steel Countersunk nuts: Steel Insert: Zinc die-cast # Ring: Plastic PESet:1 angle 2 magnet rhombus screws 2 countersunk nuts M8 1 cover capSurface:Angle: Powder coated Magnet rhombus screws: Zinc plated Countersunk nuts: Zinc plated
Alu Connection Angle I40 x 80 M (Set)
0,00 €*
Profile:
I
|
Ranura N (mm):
8
Color:Color aluminioPaíses de Entrega:En todo el mundoDescription:To connect two aluminum profiles quickly at right angles, direct inserting into the profile slot thanks to correct positioning of the pre-assembled magnet rhombus screws and countersunk nuts; the connection angle can be closed with the cover capMaterial:Angle: Aluminum die-cast Magnet rhombus screws: Steel Countersunk nuts: SteelEspeciales:Otras superficies, otros colores bajo pedidoSurface:Angle: Powder coated Magnet rhombus screws: Zinc plated Countersunk nuts: Zinc platedTip:Compatible Cover Cap see 093WA809
Aluminum Tube (Set)
0,00 €*
Color:Cover caps: Gray ≈ RAL 7042Países de Entrega:En todo el mundoDescription:To hang up message frames with pipe clamps, several message frames can be attached next to another Helpful visualization even in greater hightsMaterial:Tube: Aluminum Cover caps: Plastic TPESet:1 aluminum tube 2 cover capsSurface:Tube: AnodizedTip:Compatible Tube Clamp see 02042PC Compatible Knotted Chain 02042KC
Angle Connector 40, 45°
0,00 €*
Color:
Color aluminio
|
Para Tornillo:
M8
|
Ranura N (mm):
8
|
Superficie:
Polvo cubierto
Color:Color aluminioPaíses de Entrega:En todo el mundoDescription:To mount a profile as bracing at a 45° angle without miter cutMaterial:Fundición a presión de zincEspeciales:Otras superficies, otros colores bajo pedidoSuperficie:Liso / Recubierto de polvo
Angle Connector I 40, 45° (Set)
0,00 €*
Ranura N (mm):
8 / 10
Color:Angle connector: Alu color Cover cap: Gray ≈ RAL 7042Países de Entrega:En todo el mundoDescription:To mount a profile as bracing at a 45° angle without miter cutMaterial:Angle connector: Aluminum die-cast Centering pieces: Zinc die-cast Cover cap: Plastic PA, glass fiber reinforcedSet:1x angle connector, 4x centering pieces, 1x cover capSurface:Angle connector: Powder coated
Anschluss-Friktionsgelenk I40L für Systemarm (Set)
0,00 €*
B (mm):
40
|
MAmax (Nm):
45.0
|
Profile:
I
|
R (mm):
4.0
|
Ranura N (mm):
8
|
W (Nm):
15.0
Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; End side can be attached lateral or transverse on the profile slot, friction axis is positioned at right angles to the profile; Friction joint side can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 end friction joint 1 cover cap, 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut friction joint side), 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 25 (for T-slot nut end side), 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole friction joint side), 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 30 (for core hole end side), 2 washers 8-FSt, 2 centering plates, 2 T-slot nuts - slot 8 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc plated
Automatic Connector Steel
0,00 €*
Ancho del perfil:
45
|
D (mm):
14.4
|
L (mm):
35.0
|
Profile:
-
|
Ranura N (mm):
8
|
SW 1:
5
|
SW 2:
-
|
Tornillo:
M6 x 45
|
Version:
With assembly set, incl. screw and T-slot nut **
Países de Entrega:En todo el mundoDescription:To connect two aluminum profiles fast and solid, assembly without machining; self-cutting threadMaterial:AceroSuperficie:GalvanizadoTip:* Compatible Cover Cap see 099GA081KTip 2:** Automatic connector with assembly set for profil B incl. hammer nut instead of T-slot nut
Automatic Double Connector I, Slot 8 (Set)
0,00 €*
A (mm):
66.4
|
Ancho del perfil:
80
|
D (mm):
12.0
|
ESD:
Descarga electrostática ESD
|
L (mm):
31.0
|
Profile:
I
|
Ranura N (mm):
8
|
SW 1:
6
|
SW 2:
5
|
Tornillo:
M6 x 40
Países de Entrega:En todo el mundoDescription:To connect two aluminum profiles fast and solid, assembly without machining; self-cutting threadMaterial:AceroSuperficie:GalvanizadoTip:Compatible Cover Cap see 099GA081K
Axle for AL Roller Tracks
0,00 €*
ESD:
ESD
Países de Entrega:En todo el mundoDescription:To insert roller R28, roller H26, or roller R9 into the suitable cages for roller tracks ALMaterial:AceroEspeciales:Otros materiales, otras superficies bajo pedidoSuperficie:GalvanizadoTip:Compatible Rollers see 062RR2891, 062RH2691, 062RR991; Compatible Cages see 062ACR2891.50, 062ACH2691.50, 062ACR991.50;
Backstop Unit AL
0,00 €*
ESD:
ESD
Color:Jaula: NegroPaíses de Entrega:En todo el mundoDescription:A preassembled backstop unit for roller track profiles AL, prevents goods from moving backwards onthe AL roller track profileMaterial:Backstop: Steel Axle: Steel Cage: Plastic PA, carbon fiber reinforcedEspeciales:Otros materiales, otras superficies, otros colores bajo pedidoSurface:Backstop: Zinc plated Axle: Zinc plated
Bag Cutter FX for Profiles 40 / 45, Slot 8 / 10
0,00 €*
Color:
Gris ≈ RAL 7042
|
ESD:
-
|
Ranura N (mm):
8 / 10
Color:Bag cutter: Black, gray Centering piece: BlackPaíses de Entrega:En todo el mundoDescription:Ready to use bag cutter, changeable blade, 360° turnable, for aluminum profiles To organize work stationsMaterial:Bag cutter standard version: Plastic PA, glass ball reinforced Bag cutter ESD electrostatical discharging version: Plastic PA, glass ball reinforced with carbon Trapezoidal blade: Carbon steel Spring: Spring steel SS313 Countersunk screw: Brass Sleeve nut: Brass Screw: Steel Nut: Steel Centering piece: Plastic PA, glass fibre reinforcedEspeciales:Otros colores bajo pedidoSurface:Counter sunk screw: Nickel plated Sleeve nut: Nickel plated Screw: Zinc plated Nut: Zinc platedTip:For round tubes D28 / D30 see 6TM8D283F91ESDS01Tip 2:Compatible Trapezoidal Blade for Bag Cutter FX see 061TF91S01
Bag Cutter FX for Square Holes 9 x 9 (8.7 x 8.7)
0,00 €*
Color:
Negro
|
ESD:
Descarga electrostática ESD
Color:Holder: Black Bag cutter: BlackPaíses de Entrega:En todo el mundoDescription:Ready to use bag cutter, changeable blade, 360° turnable, for perforated metals up to 1.4 mm thick; To organize workstations, with labeling area for standard labelsMaterial:Holder ESD electrostatical discharging version: Plastic PA, carbon fibre reinforced Bag cutter ESD electrostatical discharging version: Plastic PA, glass ball reinforced with carbon Trapezoidal blade: Carbon steel Spring: Spring steel SS313 Countersunk screw: Brass Sleeve nut: Brass Screw: Steel Nut: SteelSpecials:Other colors on request, For other sheet metal thicknesses on requestSurface:Screw: Zinc plated Nut: Zinc platedTip:For profiles 40 / 45, slot 8 / 10 see 6TM840NF91S01 For round tubes D28 / D30 see 6TM8D283F91ESDS01
Bag Cutter FX for Tubes D28 / D30
0,00 €*
Color:
Negro
|
ESD:
Descarga electrostática ESD
Color:Bag cutter: BlackPaíses de Entrega:En todo el mundoDescription:Ready to use bag cutter, changeable blade, 360° turnable, for tubes or tubular frame profiles and perforated metal To organize work stationsMaterial:Bag cutter ESD electrostatical discharging version: Plastic PA, glass ball reinforced with carbon Trapezoidal blade: Carbon steel Spring: Spring steel SS313 Countersunk screw: Brass Sleeve nut: Brass Screw: Steel Nut: SteelEspeciales:Otros colores bajo pedidoSurface:Counter sunk screw: Nickel plated Sleeve nut: Nickel plated Screw: Zinc plated Nut: Zinc platedTip:Compatible Trapezoidal Blade for Bag Cutter FX see 061TF91S01
Ball Insert D24
0,00 €*
Carga Máxima (N):
-
|
ESD:
ESD
|
Fig.:
②
|
Version:
Steel ball, with Housing Attachment Clip
Países de Entrega:En todo el mundoDescription:Low-wear, low friction ball caster for flexible movements in two directions, for example at track switches and material locks; for roller tracks AL, can also be used in panels, e.g. on table tops; version with attachement clip prevents rotation of the ball housingMaterial:Ball: Steel, stainless steel Ball housing: Steel Housing Attachment Clip: SteelEspeciales:Otros materiales, otras superficies bajo pedidoSurface:Ball steel: Chrome plated / Ball stainless steel: Plain Ball housing: Chrome plated Housing Attachment Clip: Zinc platedTip:Compatible Cage for Ball / Bush Insert D24 see 062ACD2491ESD.50;