Pivot Joints

Accessories for Pivot Joints

for Profile 1.1", Pivot Joints

for Profile 1.5" x 3.0", Pivot Joints

for Profile 1.5", Pivot Joints

for Profile 1", Pivot Joints

for Profile 20 x 40, Pivot Joints

for Profile 20, Pivot Joints

for Profile 30 x 60, Pivot Joints

for Profile 30, Pivot Joints

for Profile 40 x 80, Pivot Joints

for Profile 40, Pivot Joints

for Profile 45 x 90, Pivot Joints

for Profile 45, Pivot Joints

Friction Joints for System Arm

Pivot Joints 180°

Adjustable Friction Joint B40L for System Arm (Set)

B (mm): 40.0 MAmax (Nm): 45.0 Profile: B R (mm): 3.0 Ranura N (mm): 10

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°, friction is continuously adjustable via clamping screw (or optional locking lever); End side can be attached lateral or transverse on the profile slot, friction axis is positioned at right angles to the profile; Friction joint side can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 2 cover caps 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 35 (for clamping 2 washers 8-FSt 2 centering plates 2 T-slot nuts - slot 10 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801Tip 2:Compatible Locking Lever for Adjustable Friction Joint see 041LL065K91M840M1-

0,00 €

Adjustable Friction Joint I40L for System Arm (Set)

B (mm): 40.0 MAmax (Nm): 45.0 Profile: I R (mm): 4.0 Ranura N (mm): 8

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°, friction is continuously adjustable via clamping screw (or optional locking lever); End side can be attached lateral or transverse on the profile slot, friction axis is positioned at right angles to the profile; Friction joint side can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 2 cover caps 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 35 (for clamping 2 washers 8-FSt 2 centering plates 2 T-slot nuts - slot 10 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Compatible Locking Lever for Adjustable Friction Joint see 041LL065K91M840M1-

0,00 €

Anschluss-Friktionsgelenk I40L für Systemarm (Set)

B (mm): 40 MAmax (Nm): 45.0 Profile: I R (mm): 4.0 Ranura N (mm): 8 W (Nm): 15.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; End side can be attached lateral or transverse on the profile slot, friction axis is positioned at right angles to the profile; Friction joint side can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 end friction joint 1 cover cap, 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut friction joint side), 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 25 (for T-slot nut end side), 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole friction joint side), 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 30 (for core hole end side), 2 washers 8-FSt, 2 centering plates, 2 T-slot nuts - slot 8 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc plated

0,00 €

Cutting Bush with Shank

Material: Acero Profile: I / B Superficie: Galvanizado

Países de Entrega:En todo el mundoDescription:For reduction from core hole 10.2 mm to M8 threadMaterial:AceroSuperficie:GalvanizadoTip:Compatible Screw-in Tool for Cutting Bush with Shank see 09308802

0,00 €

End Friction Joint B45-B40L for System Arm (Set)

B1 (mm): 45 B2 (mm): 40 MAmax (Nm): 45.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 12.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; End side can be attached lateral or transverse on the profile slot, friction axis is positioned at right angles to the profile; Friction joint side can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 20 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 end friction joint 1 cover cap, 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut friction joint side), 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 25 (for T-slot nut end side), 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole friction joint side), 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 30 (for core hole end side), 2 washers 8-FSt, 1 centering plate - slot 10 - 45 x 45, 1 centering plate - slot 10 - 40 x 40, 2 T-slot nuts - slot 10 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc plated

0,00 €

End Friction Joint I80L for System Arm (Set)

L x B (mm): 80 x 40 MAmax (Nm): 70.0 Profile: I R (mm): 4.0 Ranura N (mm): 8 W (Nm): 15.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; End side can be attached lateral or transverse on the profile slot, friction axis is positioned at right angles to the profile; Friction joint side can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 end friction joint 2 cover caps, 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut friction joint side), 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 25 (for T-slot nut end side), 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole friction joint side), 1 screw DIN EN ISO 4762 (DIN 912) - M8 x 30 (for core hole end side), 3 washers 8-FSt, 3 centering plates, 3 T-slot nuts - slot 8 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc plated

0,00 €

Friction Joint B40L for System Arm (Set)

B (mm): 40 MAmax (Nm): 45.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 6.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 2 cover caps 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 2 washers 8-FSt 2 centering plates 2 T-slot nuts - slot 10 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801

0,00 €

Friction Joint B45L for System Arm (Set)

B (mm): 45 MAmax (Nm): 45.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 12.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 2 cover caps 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 2 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 2 washers 8-FSt 2 centering plates 2 T-slot nuts - slot 10 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801

0,00 €

Friction Joint B80H for System Arm (Set)

B (mm): 40 L x B (mm): 80 x 40 MAmax (Nm): 200.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 2x 3.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 4 cover caps 4 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 4 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 4 washers 8-FSt 4 centering plates 4 T-slot nuts - slot 10 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801

0,00 €

Friction Joint B80L for System Arm (Set)

B (mm): 40 L x B (mm): 80 x 40 MAmax (Nm): 70.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 15.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 3 cover caps 3 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 3 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 3 washers 8-FSt 3 centering plates 3 T-slot nuts - slot 10- M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801

0,00 €

Friction Joint B90H for System Arm (Set)

B (mm): 45 L x B (mm): 90 x 45 MAmax (Nm): 200.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 2x 3.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 4 cover caps 4 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 4 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 4 washers 8-FSt 4 centering plates 4 T-slot nuts - slot 10 - M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801

0,00 €

Friction Joint B90L for System Arm (Set)

B (mm): 45 L x B (mm): 90 x 45 MAmax (Nm): 70.0 Profile: B R (mm): 3.0 Ranura N (mm): 10 W (Nm): 3.0

Color:Housing: Alu color Cover ring: Gray ≈ RAL 7042 Cover caps: Gray ≈ RAL 7042 Centering plates: Alu colorPaíses de Entrega:En todo el mundoDescription:Connection joint with friction for the creation of system arms using profile pieces; pivotable 360°; Friction joint can be attached lateral, transverse, or on the face of the profile; if attached on the front face, the core hole of the respective profile must be M8 threaded (min. 15 mm deep)Material:Housing: Aluminum die-cast Cover ring: Plastic Inserts: Steel Friction shaft: Steel Cover caps: Plastic Screws: Steel Washers: Steel Centering plates: Aluminum die-cast T-slot nuts: SteelSet:1 friction joint 3 cover caps 3 screws DIN EN ISO 4762 (DIN 912) - M8 x 45 (for T-slot nut) 3 screws DIN EN ISO 4762 (DIN 912) - M8 x 50 (for core hole) 3 washers 8-FSt 3 centering plates 3 T-slot nuts - slot 10- M8Surface:Housing: Powder coated Centering plates: Powder coated Screws: Zinc plated Washers: Zinc plated T-slot nuts: Zinc platedTip:Cutting bush for the reduction of the Ø 10.2 mm core hole to thread size M8 see 09308801

0,00 €

Friction Joint I40L for System Arm (Set)

B (mm): 40 MAmax (Nm): 45.0 Profile: I R (mm): 4.0 Ranura N (mm): 8 W (Nm): 3.0

0,00 €

Friction Joint I80H for System Arm (Set)

B (mm): 40 L x B (mm): 80 x 40 MAmax (Nm): 200.0 Profile: I R (mm): 4.0 Ranura N (mm): 8 W (Nm): 2x 15.0

0,00 €

Friction Joint I80L for System Arm (Set)

B (mm): 40 L x B (mm): 80 x 40 MAmax (Nm): 75.0 Profile: I R (mm): 4.0 Ranura N (mm): 8 W (Nm): 0.5

0,00 €

Friction Joint M45L for System Arm (Set)

B (mm): 45 MAmax (Nm): 45.0 R (mm): 2.5 Ranura N (mm): 8 W (Nm): 3.0

0,00 €

Friction Joint M90H for System Arm (Set)

B (mm): 45 L x B (mm): 90 x 45 MAmax (Nm): 200.0 R (mm): 2.5 Ranura N (mm): 8 W (Nm): 2x 3.0

0,00 €

Friction Joint M90L for System Arm (Set)

B (mm): 45 L x B (mm): 90 x 45 MAmax (Nm): 70.0 R (mm): 2.5 Ranura N (mm): 8 W (Nm): 3.0

0,00 €

Locking Lever for Adjustable Friction Joint (Set)

Profile: I / B

Assembly Set:1 locking lever M8 x 40 1 bushColor:Locking lever: BlackPaíses de Entrega:En todo el mundoDescription:To adjust the friction without toolsMaterial:Locking lever: Plastic PA Bush: CopperTip:Compatible Adjustable Friction Joints see 061FFZ40LN08 and 061FFZ40LN10

0,00 €

Pivot Joint 180°, 1 Slot

B (mm): 45.6 Cuadrícula: 45 D (mm): 45.0 E (mm): 42.0 G (mm): 45.0 H (mm): 141.5 Ranura N (mm): 8 / 10 ØF (mm): 8.5 ØS (mm): 8.5

Color:Color aluPaíses de Entrega:En todo el mundoDescription:To make a pivoting connection between two profiles, with separate locating pinsMaterial:Joint: Aluminum die-cast Centering piece 5/6 and 6/8: Plastic PA Centering piece 8/10: Zinc die-castEspeciales:Otras superficies, otros colores bajo pedidoSurface:Joint: Powder coated Centering piece: Plain

0,00 €

Pivot Joint 180°, 2 Slots

B (mm): 60.4 Cuadrícula: 30 D (mm): 30.0 E (mm): 28.0 G (mm): 30.0 H (mm): 86.0 Ranura N (mm): 6 / 8 ØF (mm): 6.5 ØS (mm): 6.4

0,00 €

Pivot Joint 20

Ranura N (mm): 5 / 6 Ángulo de apertura: 190°

Color:Color aluPaíses de Entrega:En todo el mundoDescription:To make a pivoting connection between two profiles or panels; with separate locating pins for slot 5 and slot 6; by tightening or loosening the screws you can seamlessly regulate the functionality of the joint or you can fix it in one positionMaterial:Aluminio fundido a presiónSuperficie:Polvo cubierto

0,00 €

Pivot Joint 20 with Locking Lever

Ranura N (mm): 5 / 6 Ángulo de apertura: 182°

Color:Color aluPaíses de Entrega:En todo el mundoDescription:For connection of two profiles or panels, with attachment at any angle, with separate slot fixing for slot 5 and slot 6; by tightening or loosening the screws and the KIPP-locking lever you can seamlessly regulate the functionality of the joint or you can fix it in one positionMaterial:Joint: Aluminum die-cast KIPP-locking lever: Plastic PA, glass fiber reinforcedSuperficie:Polvo cubierto

0,00 €

Pivot Joint 20 x 40

Ranura N (mm): 5 Ángulo de apertura: 154°

0,00 €

Pivot Joints

Accessories for Pivot Joints

for Profile 1.1", Pivot Joints

for Profile 1.5" x 3.0", Pivot Joints

for Profile 1.5", Pivot Joints

for Profile 1", Pivot Joints

for Profile 20 x 40, Pivot Joints

for Profile 20, Pivot Joints

for Profile 30 x 60, Pivot Joints

for Profile 30, Pivot Joints

for Profile 40 x 80, Pivot Joints

for Profile 40, Pivot Joints

for Profile 45 x 90, Pivot Joints

for Profile 45, Pivot Joints

Friction Joints for System Arm

Pivot Joints 180°

Filtro