PRODUKTPORTRAIT – FLOOR SIGNS

 

Safe and lean: Highlight danger zones easily with self-adhesive FATH's floor signs

Floor signs for rapid, reliable labeling

Bodenschild

  • Pictograms as per ASR standards

  • Outstanding adhesive strength

  • Forklift-resistant and extremely long-lasting

  • Suitable for almost all industrial floors

  • Prohibition signs, mandatory signs, warning and information signs

  • Highly effective signaling

 

 

 

 

FATH's floor signs: self-adhesive and forklift-resistant

Self-adhesive, dimensionally stable FATH Floor Signs are easily affixed to the floor, can be driven over immediately and are easy to clean. They are suitable for virtually all industrial floors and surfaces. Unlike with paint or lacquer markings, there are no long drying times and no unpleasant odors. Thanks to the adhesive applied across their entire rear surface, these floor signs even adhere to problematic surfaces permanently.

 

New printing method protects against scratching

What makes FATH's floor signs so special: The pictogram’s color print is applied to the inside instead of the outer surface and is then covered with a transparent protective film. This means that the image is fully enclosed between the film and the adhesive and is thus permanently protected against wear and scratching, even after long use and heavy exposure to the surface. The hard-wearing plastic surface suitable for industrial use can withstand high loads, such as industrial trucks driving over it.

 

Full flexibility for reorganization

These self-adhesive floor signs can be detached from the floor without leaving residue if reorganization or facility extensions are planned. The floor remains intact after signs are removed since no chemicals or acid-based substances are required to remove them. Buildings, warehouses, and surfaces can be labeled permanently or temporarily without causing any damage. That is lean too!

 

Comply with ASR standards with FATH Floor Signs

The pictograms on FATH's floor signs are designed in full compliance with ASR standards. FATH's floor signs are 450 millimeters in size, guaranteeing that symbols are seen from a distance – viewing from a forklift, for example. This means they comply with the German Technical Workplace Regulations (ASR) and meet the requirements specified in the German Ordinance on Workplaces (ArbStättV), which serve to ensure safety and health protection for employees.

Bodenschild

 

Would you like to learn more about FATH Floor Signs?

The data sheet is available for download here.

Get to know now:

The data sheet is available for download here:

Get all the technical data for FATH Floor Signs

Enter your personal details in the form and start the download of your PDF.

Versions

All standard signs in the following categories are available:

Prohibition signs

0203sp05_p_3d

 

Mandatory signs

0203sm01_p_3d

 

Warning and information signs

0203sw02_p_3d

 

Do you want to try out the FATH Floor Signs or order right away?

Then contact us here!

So you’re interested in the FATH Floor Signs?

Choose whether you want a sample, a quote or personal advice.

Enter your personal details in the form and specify your desired version and number of items.

Your questions, our answers:

We have collected and answered the most frequently asked questions about our floor signs for you. Perhaps your question is already included.

If not, please write to us.

 

Are warning signs and information signs scratch-resistant?

All FATH signs, whether they are warning signs, information signs or prohibition signs, are manufactured using a sandwich procedure. This means that the print is protected and scratch-resistant as an inclusion between the film and the adhesive.

Can the sticker be driven over by forklifts?

Due to the full-surface application of industrial adhesive on the reverse side, the FATH floor signs / stickers can be driven over and will stand up to forklifts.

Where is the best location for the signage to be applied?

Decisions on where signage is to be applied are to be made depending on the situation. We would be happy to advise you personally and support you in designing a color coding system for your signage.

Should parked vehicles be allowed to cover the floor signs?

Warning and information signs should always be clearly visible in order to achieve the desired effect. This is the only way that attention can be drawn to relevant situations at first glance. For this reason parked vehicles should not cover or conceal the signage.

Are the warning signs suitable for commercial areas?

All FATH floor markings, warning signs and floor signs are designed for industrial use and can withstand the stresses encountered in commercial areas.

Are there any general instructions to be observed before adhering signage?

The subsurface should be stable, clean, dry and free of grease. These are the only general instructions that need to be followed.

Can the Head Protection sign also be attached to machines?

Because of the special adhesive properties of the glue, the Head Protection sign just like all other FATH safety signs can also be attached to walls, machines, etc.

Can the Eye Protection sign also be attached to machines?

Because of the special adhesive properties of the glue, the Head Protection sign can also be attached to walls, machines, etc. This also applies to the Wear Eye Protection sign.

Do signs and warning signs reduce the danger?

Signs and warning signs for hazards and dangers have a high visual impact. Safety and health protection labeling in workplaces raises awareness and reduces risks and dangers.

Tips & tricks around the topic of Floor Markings

Floor markings for storage and production facilities

Floor markings for storage and production facilities: useful tips!

You see it every day: Floor markings in all areas of production, logistics, hallways or road traffic. Mostly we do not pay much attention to them, but you as the person responsible know that floor markings are an important part of public and operational organization. They demarcate areas, protect employees and goods from danger and visualize escape routes and emergency routes.

Find out more...

More product recommendations:

 

FATH Floor Marking Shapes and Floor Windows
FATH Floor Marking Shapes and Floor Windows

Immediate visualization – without the disadvantages of paint and ink

The self-adhesive, durable FATH floor marking shapes and floor windows are easy to attach in the desired position, can be driven on immediately and are easy to clean. They are suitable for almost all industrial floors and substrates such as stone, concrete or metal.

Further information...

FATH Floor Marking Tapes
Floor Marking Tapes

Self-adhesive floor marking tapes: forklift-resistant and affixes instantly

The self-adhesive, sturdy FATH floor marking tapes are custom-made and can easily be adhered to industrial floors. Vehicles can drive over them immediately and they are easy to clean.

Further Information...

FATH Covid-19 Health and Safety Stickers
2020-05-19-FATH-Featured-Images-Stickers

FATH Corona information signs for sticking onto multiple surfaces

Corona stickers and information signs help enormously to anchor the new required behavior patterns in people's minds in the long term. They are a simple but effective measure to protect customers, visitors and employees.

Further Information...