Product World

New Products

Product World
Services
Company

New Products

New Products Engineering Components

New Products Shopfloor and Intralogistics

Filter products

24.0
26.4
50.8 (2.00")
60.0
64.0
66.4
76.2 (3.00")
80.0
90.0

2.05 (2.2)
4.4 (4.5)
5.9 (6.0)

4.3
5.3
30
50.8 (2.00")
60.0
76.2 (3.00")
80.0
90.0

4.8 (0.19")
5.0
6.0
6.4 (0.25")

-
Alu color
Alu color coated
Black
Blue ≈ RAL 5005
Blue ≈ RAL 5015
Gray ≈ RAL 7004
Gray ≈ RAL 7012
Gray ≈ RAL 7035
Gray ≈ RAL 7042
Green ≈ RAL 6029
Green ≈ RAL 6032
Natural
Orange ≈ RAL 2009
Red ≈ RAL 3020
White ≈ RAL 9003
White ≈ RAL 9010
Yellow ≈ RAL 1003
Yellow ≈ RAL 1018
Yellow ≈ RAL 1023

11.2 (0.44")
13.5
16.5 (0.65")
18.0
20.5

16 x 40
16 x 80
16 x 120
16 x 160
40 x 40
40 x 40 45°
40 x 40 R33.3 - 90°
40 x 40 R40 - 90°
40 x 80
40 x 120
40 x 160
80 x 80
80 x 120
80 x160
80 x 160
R40 x R80 30°
R40 x R80 45°
R40 x R80 60°
R40 x R80 90°
R40xR80 90°

12.7 (0.50")
14.0
20.0
20.1 (0.79")

-
ESD
ESD electrostatical discharging

22.4 (0.88")
27.0
33.0 (1.30")
36.0
41.0

1 cross
1 cross *
1 cross 2 pins, ESD electrostatical discharging
1 cross and 2 pins
1 cross turned 25°
1 cross turned 45°
1 pin for core hole
2 crosses
2 crosses *
2 crosses, 1 pin
2 crosses, 2 pins
2 crosses, ESD electrostatical discharging
2 crosses and 2 pins
2 crosses turned 30°
2 crosses turned 45°
2 pins
4 Pins for core hole, With hole Ø 10.3
4 crosses
4 crosses, ESD electrostatical discharging
6 pins
8 pins
8 support ribs 11.3 x 2.0
ESD electrostatical discharging, 1 pin for core hole
New version, 1 cross

12.7 (0.50")
15.0
19.1 (0.75")
20.0
22.5

25.4 (1")
30
38.1 (1.5")
40
45

25.4 (1")
30.0
38.1 (1.50")
40.0
45.0

6.9 (0.27")
7.0
8.9 (0.35")
9.0

36.0
76.0
2000.0
4000.0

Set 1
Set 2

M4 x 16
M4 x 20
M4 x 25
M4 x 30
M5 x 20
M5 x 25
M5 x 30
M5 x 35
M5 x 40
M6 x 20
M6 x 25
M6 x 30
M6 x 35
M6 x 40
M8 x 20
M8 x 25
M8 x 30
M8 x 35
M8 x 40
M8 x 45
M10 x 20
M10 x 30
M10 x 40
M10 x 50
M10 x 60

Typ E + Typ F: CEE 7/4
Typ G: BS 1363

Plain
Powder coated

-
2 - 10 kg
8 - 20 kg
I8 / B8
I8 / B10
I8 / I8
I8 / M8
Stainless steel ball
Stainless steel ball, with Housing Attachment Clip
Steel ball
Steel ball, with Housing Attachment Clip
incl. assembly set

4.3 (4.0)
4.4 (4.3)
4.5
4.9
5.0
5.1 (5.0)
6.0
6.8
6.8 (6.8)
6.9
6.9 (6.8)
6.95
7.0
7.0 (6.8)
7.0(6.8)
7.1
7.1 (6.8)
7.2 (6.8)
7.5
7.6
8.0
8.8
10.0
10.1
10.1 (10.0)
10.2 (10.0)
10.3
10.3 (10.0)
10.4 (10.0)
11.2
11.3
12.0
12.3
12.4
12.8
14.2
16.0
20.0

Minimum €

–

Maximum €

Alu Connection Angle 20

Assembly Set:2 hammer nuts - slot 6 - M4, 2 screws DIN 7984 - M4 x 8Color:Angle: Alu colorDelivery Countries:WorldwideDescription:To connect two aluminum profiles or panels at right angles; the connection angle can be closed with the cover capMaterial:Angle: Aluminum die-cast Assembly set: SteelSpecials:Other surfaces, other colors on requestSurface:Angle: Plain / Powder coated Assembly set: Zinc platedTip:Compatible Cover Cap see 093WA203

€0.00*

Angle Element T1 40, 45°

Profile: I | Slot N (mm): 8

Color:Alu colorDelivery Countries:WorldwideDescription:To mount a profile as bracing at a 45° angle without miter cutMaterial:AluminumSurface:AnodizedTip:Compatible Cover Cap 40 x 40 45° see 091048 (black) / 091048S01 (gray)

€0.00*

Angle Element T1 80 x 40, 45°

Profile: I | Slot N (mm): 8

€0.00*

Angle Element T2 40, 45°

Profile: I | Slot N (mm): 8

Color:Alu colorDelivery Countries:WorldwideDescription:To mount two profiles as bracing at a 45° angle without miter cutMaterial:AluminumSurface:AnodizedTip:Compatible Cover Cap 40 x 40 45° see 091048 (black) / 091048S01 (gray)

€0.00*

Angle Element T2 80 x 40, 45°

Profile: I | Slot N (mm): 8

€0.00*

Bag Cutter FX for Square Holes 9 x 9 (8.7 x 8.7)

Color: Black | ESD: ESD electrostatical discharging

Color:Holder: Black Bag cutter: BlackDelivery Countries:WorldwideDescription:Ready to use bag cutter, changeable blade, 360° turnable, for perforated metals up to 1.4 mm thick; To organize workstations, with labeling area for standard labelsMaterial:Holder ESD electrostatical discharging version: Plastic PA, carbon fibre reinforced Bag cutter ESD electrostatical discharging version: Plastic PA, glass ball reinforced with carbon Trapezoidal blade: Carbon steel Spring: Spring steel SS313 Countersunk screw: Brass Sleeve nut: Brass Screw: Steel Nut: SteelSpecials:Other colors on request, For other sheet metal thicknesses on requestSurface:Screw: Zinc plated Nut: Zinc platedTip:For profiles 40 / 45, slot 8 / 10 see 6TM840NF91S01 For round tubes D28 / D30 see 6TM8D283F91ESDS01

€0.00*

Ball Insert D24

ESD: ESD | Fig.: ② | Max. Load (N): - | Version: Steel ball, with Housing Attachment Clip

Delivery Countries:WorldwideDescription:Low-wear, low friction ball caster for flexible movements in two directions, for example at track switches and material locks; for roller tracks AL, can also be used in panels, e.g. on table tops; version with attachement clip prevents rotation of the ball housingMaterial:Ball: Steel, stainless steel Ball housing: Steel Housing Attachment Clip: SteelSpecials:Other materials, other surfaces on requestSurface:Ball steel: Chrome plated / Ball stainless steel: Plain Ball housing: Chrome plated Housing Attachment Clip: Zinc platedTip:Compatible Cage for Ball / Bush Insert D24 see 062ACD2491ESD.50;

€0.00*

Ball Unit

ESD: - | Version: Stainless steel ball

Color:Cage: BlackDelivery Countries:WorldwideDescription:A preassembled ball unit for roller track profiles AL, with low-wear, low friction ball caster for flexible movements in two directions, for example at track switches and material locksMaterial:Ball: Steel, stainless steel Ball chassis: Steel Cage: Plastic PA, carbon fiber reinforcedSpecials:Other materials, other surfaces on requestSurface:Ball steel: Chrome plated / Ball stainless steel: Plain Ball housing: Chrome plated Housing Attachment Clip: Zinc platedTip:Brush unit consisting of: – Ball insert, see 062AQ; – Cage for ball insert, see 062ACD2491ESD.50; Compatible Slide Rail AL see 062AS91ESD.2000;

€0.00*

Bottle Holder FX for Square Holes 9 x 9 (8.7 x 8.7)

Color: Black

Color:Rear mounting holder: Black Front locking holder: BlackDelivery Countries:WorldwideDescription:Ready to use bottle holder, 360° turnable, for perforated metals up to 1.4 mm thick; To organize workstations, with labeling area for standard labelsMaterial:Rear mounting holder: Plastic PA, carbon fibre reinforced Front locking holder: Plastic PA, glass ball reinforced Wire: Stainless steel SS304 Spring: Spring steel SS313 Screw: Steel Nut: SteelSpecials:Other colors on request, For other sheet metal thicknesses on requestSurface:Screw: Zinc plated Nut: Zinc platedTip:For profiles 40 / 45, slot 8 / 10 see 6TM840ND100S01 For round tubes D28 / D30 see 6TM8D283D100S01

€0.00*

Broom Holder FLEX FX 20 - 30 for Square Holes 9 x 9 (8.7 x 8.7)

Color: Black

Color:Holder: Black Broom holder: Black Retaining strap: BlackDelivery Countries:WorldwideDescription:Ready to use broom holder to hang up tools with Ø 20 up to 30 mm diameter, 360° turnable, for perforated metals up to 1.4 mm thick; To organize workstations, with labeling area for standard labelsMaterial:Holder: Plastic PA, carbon fibre reinforced Broom holder: Plastic PA, glass ball reinforced Retaining strap FLEX: Plastic TPE Bushings: Steel Screws for retaining strap: Steel Spring: Spring steel SS313 Screw: Steel Nut: SteelSpecials:Other colors on request, For other sheet metal thicknesses on requestSurface:Screw: Zinc plated Nut: Zinc platedTip:For profiles 40 / 45, slot 8 / 10 see 6TM840NX2030S01 For round tubes D28 / D30 see 6TM8D283X2030S01

€0.00*

Clamp Profile Connector 30 (Set)

Profile: I | Slot N (mm): 6

Color:Clamp profile connector: Alu colorDelivery Countries:WorldwideDescription:To connect two aluminum profiles at right angles and to attach a frame element to a frame structure by means of a suitable mounting; the upper monting defines the position in the structure, by shifting the lower mouting afterwards the frame can be fixed and lockedMaterial:Clamp profile connector: Zinc die-cast Screws: SteelSet:1 clamp profile connector, 2 screws DIN EN ISO 7380 (DIN 34805) - M6 x 16Surface:Clamp profile connector: Powder coated Screws: Zinc platedTip:Compatible Mounting for Clamp Profile Connector 30 (Set) see 093XWWC301N06

€0.00*

Cloth Clip FX for Square Holes 9 x 9 (8.7 x 8.7)

Color: Black | ESD: ESD electrostatical discharging

Color:Rear mounting holder: Black Front locking holder: BlackDelivery Countries:WorldwideDescription:Ready to use cloth clip, 360° turnable, for perforated metals up to 1.4 mm thick; To organize workstations, with labeling area for standard labelsMaterial:Rear mounting holder ESD electrostatical discharging version: Plastic PA, carbon fibre reinforced Front locking holder ESD electrostatical discharging: Plastic PA, glass ball reinforced with carbon Wire: Stainless steel SS304 Spring: Spring steel SS313 Screw: Steel Nut: SteelSpecials:Other colors on request, For other sheet metal thicknesses on requestSurface:Screw: Zinc plated Nut: Zinc platedTip:For profiles 40 / 45, slot 8 / 10 see 6TH240NG5050S01 For round tubes D28 / D30 see 6TH2D283G5050ESDS01

€0.00*

Connection Coupling GST15i5 for Module F Line (Set)

Color:Connection coupling: BlackDelivery Countries:WorldwideDescription:5 pole coupling piece to directly connect LED lamps and power strips Module F LineMaterial:Connection coupling: Plastic PA Connector T-slot nut: SteelSet:1 connection coupling 1 connector T-slot nut 4 grub screws M8 x 10 mmSurface:Connector T-slot nut: Zinc-platedTip:Compatible Power Strip see 6SBEU24DI.370 Compatible LED Lamp see 6SL0040RI.476Tip 2:Please note: Chaining of max. 6 modules (LED lamps / power strips), cable length max. 15 m for main power cable, connection cables and modules Connected load max. 3500 watts

€0.00*

Cover and Reduction Profile B Slot 10 deep

Color: Gray ≈ RAL 7004 | Fig.: ② | Profile: B | Slot N (mm): 10

Color:Profile: Black, gray Sealing lip: BlackDelivery Countries:WorldwideDescription:To cover size 10 profile slots and to secure panels with a thickness of 2 - 6 mmMaterial:Profile: Plastic PP Sealing lip: Plastic TPESpecials:Other colors on request

€0.00*

Cover Cap for 40 mm Modular Dimension

Color:Black, grayDelivery Countries:WorldwideDescription:To cover the end of the profileMaterial:Plastic PA, glass fiber reinforced, * glass ball reinforcedSpecials:ESD electrostatical discharging, other sizes, other colors on request

€0.00*

Cover Cap for Zinc Connection Angle I 40

Color: Gray ≈ RAL 7042 | Fig.: ②

Color:Black, grayDelivery Countries:WorldwideDescription:To cover the open side of the connection angleMaterial:Plastic PA, glass fiber reinforcedTip:Compatible Zinc Connection Angle I 40 see 093W407N08R

€0.00*

Cover Cap, with Locking Pin

Color: Gray ≈ RAL 7012 | Fig.: ②

Color:Black, grayDelivery Countries:WorldwideDescription:To cover the end of the profileMaterial:Plastic PA, glass ball reinforcedSpecials:ESD electrostatical discharging, other sizes, other colors on request

€0.00*

Cover Profile Slot 8 - 2.2

Color: Yellow ≈ RAL 1018 | ESD: - | Profile: B | Slot N (mm): 8

Color:Black, yellow, red, blue, gray, white, natural, aluminum colorDelivery Countries:WorldwideDescription:To cover T-Slots with 8 width and a 2.2 mm profile webMaterial:Plastic PPSpecials:Other colors on requestTip:ESD electrostatical discharging version: Notch at the bottom side

€0.00*

Direct Connector I 90°, Slot 8

Profile: I | Slot N (mm): 8

Delivery Countries:WorldwideDescription:To connect two aluminum profiles at right angles, before the application one core hole must be M8 threaded (min. 18 mm deep)Material:Stainless steel

€0.00*

Double Bearing Unit 2 Rollers Centric Shaft Ø 14

Profile: I

Delivery Countries:WorldwideDescription:To build sliding carriages To linearly guide loads, steel roller with ball bearings runs directly on shaft Ø 14 mm Completely pre-assembled from roller profile I slot 8Material:Roller: Steel Screws: Steel Washers: Steel Tension pins: Steel Profile: AluminumSurface:Roller: Zinc plated Screws: Zinc plated Washers: Zinc plated Tension pins: Zinc plated Profile: AnodizedTip:Compatible Wiper and Lubricator Ø 14 for Roller Profile I Slot 8 (Set) see 091381S01

€0.00*

Double Bearing Unit 2 Rollers Eccentric Shaft Ø 14

Profile: I

Delivery Countries:WorldwideDescription:To build sliding carriages To linearly guide loads, steel roller with ball bearings runs directly on shaft Ø 14 mm Completely pre-assembled from roller profile I slot 8 To tighten the eccentric screw, a pin spanner is needed for the four holes of the adjusting washerMaterial:Roller: Steel Screws: Steel Excentric screw: Steel Adjusting washer: Steel Washers: Steel Tension pins: Steel Profile: AluminumSurface:Roller: Zinc plated Screws: Zinc plated Excentric screw: Zinc plated Adjusting washer: Zinc plated Washers: Zinc plated Tension pins: Zinc plated Profile: AnodizedTip:Compatible Wiper and Lubricator Ø 14 for Roller Profile I Slot 8 (Set) see 091381S01

€0.00*

Double T-slot Nut I Slot 8 for Double Adapter D30 (Set)

M: M6 | Profile: I

Delivery Countries:WorldwideDescription:Roll-in double T-slot nutMaterial:Double T-slot nut: Steel Ball: Stainless steel Spring: Spring steel Screws: SteelSet:1 roll-in double T-slot nut I slot 8 2 screws DIN EN ISO 4762 (DIN 912) - M6 x 16Surface:Double T-slot nut: Zinc plated Screws: Zinc plated

€0.00*

Drill / Driver Holder FX D50 for Square Holes 9 x 9 (8.7 x 8.7)

Color: Black | Fig.: ①

Color:Rear mounting holder: Black, gray Front locking adapter: Black, gray Drill / driver holder: Black, grayDelivery Countries:WorldwideDescription:Ready to use tool Drill / Driver Holder for a wide range of standard cordless screwdrivers, 360° turnable, for perforated metals up to 1.4 mm thick; To organize workstations, with labeling area for standard labelsMaterial:Rear mounting holder black version: Plastic PA, carbon fibre reinforced Rear mounting holder gray version: Plastic PA, glass fibre reinforced Front locking adapter: Plastic PA, glass ball reinforced Drill / driver holder: Plastic PA, glass ball reinforced Spring: Spring steel SS313 Screw: Steel Nut: SteelSpecials:Other colors on request, For other sheet metal thicknesses on requestSurface:Screw: Zinc plated Nut: Zinc platedTip:For profiles 40 / 45, slot 8 / 10 see 6TM840NL12591S01 For round tubes D28 / D30 see 6TM8D283L12591S01

€0.00*

Drill / Driver Holder FX D50 for Tubes D28 / D30

Color: Black

Color:Holder: Black, grayDelivery Countries:WorldwideDescription:Ready to use tool Drill / Driver Holder for a wide range of standard cordless screwdrivers, 360° turnable, for aluminum profiles; To organize workstationsMaterial:Holder: Plastic PA, glass ball reinforced Spring: Spring steel SS313 Screw: Steel Nut: SteelSpecials:Other colors on requestSurface:Screw: Zinc plated Nut: Zinc plated

€0.00*